We are interested in cooperation with the manufacturers of process heaters and preheaters, who are looking for an official and reliable distributor that deals with supply & delivery of their equipment to the industrial plants in Russia.
The company’s top management and sales team are well acquainted with the Russian market, its mentality and laws; they also understand industrial specifics of the financial and economic activities of the Russian customers. All our sales managers have a large customer database, extensive experience of successful sales and well-established connections with the potential buyers of your process heating systems. This allows our managers to promptly set out the most promising directions for promotion and to ensure a rapid entry of the products into the promising Russian market. Our employees, who are fluent in English and German, are focused on working at the international market with the supplies of foreign equipment.
Our team of experienced engineers, who can handle the most serious technical problems, constantly keeps in touch with the Russian customers, holds meetings and delivers presentations regarding the latest achievements of our manufacturing partners. They point out the engineering challenges and actively communicate with all the departments at Russian plants. That is why the specifics of doing a business in the Russian Federation are well-known to us, and we also know the equipment of the local industrial plants and their up-to-date modernization needs.
Once we become your authorized representative in Russia, our marketing staff will carry out a market research in order to check the demand for process heaters and preheaters, will submit a market overview for heaters that you offer and evaluate the needs for this type of equipment at local plants. Our specialists will also estimate the potential and capacity of this market at local industrial plants. Our IT-team will start developing a website for your products in Russian. Our experts will assess the conformity between your process heaters and preheaters and customer needs as well as analyze the common reaction to the new goods in general. We will look into the categories of potential customers, and pick out the largest and the most promising plants.
Upon becoming your authorized agent on the territory of Russia, ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), will obtain certificates, if required, for a batch of the goods, for various types of process heaters and preheaters in compliance with Russian standards. We can also arrange the inspection in order to obtain TR TS 010 and TR TS 012 Certificates. These certificates provides permission to operate your equipment at all industrial plants of the EAEU countries (Russia, Kazakhstan, Belarus, Armenia, Kyrgyzstan), including the hazardous industrial facilities. Our company is eager to assist in issuing Technical Passports for heaters as per Russian and other EAEU countries’ requirements.
Our engineering company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), collaborates with several Russian design institutes in various industrial segments, which allows us to conduct preliminary design as well as subsequent design works according to the standards, construction rules and regulations that are applicable in Russia and other CIS countries. It also enables us to include your process heaters and preheaters into the future projects.
The Company has its own logistics department that can provide packing service, handling as well as the most efficient and cost effective mode of transportation of the goods (incl. over dimensional and overweight goods). The goods can be delivered on DAP or DDP-customer’s warehouse basis in full compliance with all the relevant regulations and requirements that are applicable on the Russian market.
Our company has its own certified specialists who will carry out installation supervision and commissioning of the delivered equipment, as well as further guarantee and post-guarantee maintenance of heaters. They will also provide necessary training and guidance for the customer’s personnel.
This type of heaters is used to preheat an intermediate heat transfer agent (thermal liquid) that, in turn, heats other equipment or liquids.
Heaters with a spiral coil, in one or another version, are commonly applied in gas and chemical industries.
The following design configurations of heaters with a spiral coil are available:
As distinctive specific features, the following can be noted:
The following products can be used as fuels for the heater operation: natural gas.
Depending on the fuel type, a heater can be reequipped with an air blower, special nozzles on housing, drain box with an auger-type unloader for blowing-off cleaning cycles carried out to remove ash accumulated as a result of fuel combustion.
Heaters automatically maintain the operating temperature set by an operator. The error is 0.4% of the temperature setting.
Heaters have several protective characteristics to ensure continuous operation within the specified limits. They are automatically shut down as soon as deviations are detected during operation.
Limit switches and sensors ensure reliable operation. They monitor the burner flame, heat transfer agent temperature, spent gas temperature, heat transfer agent and fuel flow rate, combustion air pressure.
Purpose: to preheat liquids especially overheat-sensitive
Configuration: horizontal
Design features:
Performance: 2-100 million BTU/hour
Service life: 30 years
Scope of application: chemical, automobile, food processing and other industries where accurate heating of overheat-sensitive liquids is required.
Performance:
1-85 million BTU/hour
0.25-19.0 Gcal/hour
0.29-23.00 MW
Service life: 30 years
Scope of application: primarily they are used in food processing, chemical industry. These heaters can be used to heat virtually any liquid.
Performance:
1-50 million BTU/hour
0.25-14.0 Gcal/hour
0.29-16.00 MW
Service life: 30 years
Scope of application: a unit of this type is used, first of all, for sophisticated high-temperature processes; frequent cleaning of a combustion chamber is necessary.
Performance:
0.3-8 million BTU/hour
0.07-2.3 Gcal/hour
0.08-2.5 MW
Service life: 15 years
It indirectly heats liquid in gaseous or liquid state. The liquid flows through heated coils in a heater. The coils are submerged into a liquid bath heated by a fire tube; a burner is used to heat a fire tube. As a liquid bath, water-glycol mixture, salt solution or, sometimes, thermal liquid can be used, depending on the necessary temperature.
Purpose: used to heat low-temperature liquids.
These heaters (preheaters) are used to heat a wide range of liquids. They are provided with several tubes with electric heating elements within these tubes. Elements heat liquid or gas passing through the chamber around the heating tubes.
Performance: from 29 to 200 kW
They are designed to preheat liquids, gases or vapors including air, heat agents, helium, nitrogen, steam or water.
These systems are used to heat or to maintain temperatures at up to 550°C for a wide range of liquids or gases placed in containers or process vessels. Low power density of heating elements is recommended to heat viscous or temperature-sensitive materials such as asphalt, chocolate, resins, rubbers and tar.
Electric air heaters are designed for operation in furnaces, autoclaves and other industrial drying, baking and thermal treatment systems.
Upon becoming the official distributer of process burners and ignition systems, our company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), carries out the following: finds the buyers of your products on the market, conducts technical and commercial negotiations with the customers regarding the supplies of your equipment, concludes contracts. Should a bidding take place, we will collect and prepare all the documents required for the participation, conclude all the necessary contracts for the supply of your equipment, as well as register the goods (process burners and ignition systems) and conduct customs clearance procedures. We will also register a certificate of transaction (Passport of Deal) required for all foreign trade contracts in the foreign currency control department of the authorized Russian bank so that currency transaction could be effected. If required, our company will implement an equipment spacing project in order to integrate your equipment into the existing or newly built production plant.
We are convinced that our company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), will become your reliable, qualified and efficient partner & distributor in Russia.
We are always open for cooperation, so let’s move forward together!